[. . . ] FS-C8026N Color Page Printer Operation Guide Safety Notes Please read the Operation Guide before using the printer. The sections of this guide and parts of the printer marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the printer. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points. CAUTION: Indicates that personal injury or mechanical damage may result from insufficient attention to or incorrect compliance with the related points. [. . . ] You can perform this operation only when optional fonts are installed in the printer. The letter before the number indicates the location of the font, as shown below: I SO MO HO Internal font Soft (downloaded) font Fonts in optional memory card Fonts in RAM disk or optional hard disk (HD-10) >Print KPDL Errs ?A blinking question mark (?) appears. >>?I000 Default Font You can select the default font for the current interface. The default font can be one of the internal fonts or a font that is downloaded to the printer memory or stored on memory card or hard disk. In this menu, you can also set the type and pitch for Courier and Letter Gothic; as well as to print a font list. 6 7 8 Press the or key repeatedly until the desired font number appears. For font numbers of the internal fonts, see Printing lists of fonts on page 3-36. or key repeatedly until Font > Font > 3-34 3. 6 Making Default Settings Selecting regular or dark Courier/Letter Gothic Courier or Letter Gothic font thickness can be selected as Regular or Dark. The procedure is the same for Letter Gothic. Changing the default font size You can change the size of the default font. If you selected a proportional font, the character size can also be changed. 1 2 Press the MENU key. or key repeatedly until Font > Font > > Font 3 3 Press the key. Press the Select > appears. or key until >Font >Font Select Internal > >Font Select Internal > 4 4 5 Make sure that Internal is displayed and press the key. If you are selecting the thickness of the Letter Gothic font, choose >> Letter Gothic here instead. Make sure that Internal is displayed and press the key. or key repeatedly until >>Size 5 >>Size 012. 00 point(s) >>Courier Regular 6 Press the ENTER key. A blinking question mark (?) appears. >>Size 012. 00 point(s) >>Courier ?Regular 7 7 8 9 Press the or key to increase or decrease the value at the blinking cursor. The font size can be set between 4 and 999. 75 points, in 0. 25-point increments. The display returns to Ready. Select Regular or Dark using the Press the ENTER key. or key. 8 9 Press the MENU key. The display returns to Ready. 3-35 3. 6 Making Default Settings Character pitch for Courier/Letter Gothic You can set the character pitch for fixed fonts when the default font is Courier or Letter Gothic. Setting the character code set You can change the character code set. (The default character code set is IBM PC-8. ) 1 2 Press MENU key. or key repeatedly until Font > Font > Font > 3 Press the key. Press the Select > appears. or key until >Font >Font Select Internal > 3 4 Press the Press the appears. key. or key repeatedly until >Code Set 4 5 Make sure that Internal is displayed and press the key. [. . . ] The hard disk is inserted into the hard disk slot (HDD) on the back of the printer as shown in the illustration. To format the hard disk, use the printer operator panel or the KM-NET Printer Disk Manager. Before you install the hard disk in the printer, power off the printer and unplug the power cord. Table A-1 A. 3. 6 CA-33 Caster Kit These casters are mounted at the bottom of the bottom feeder for moving or fixing the printer. The CA-31 is the regular casters that may be used for the standalone FS-C8008 series printers, including only the standard PF-30A paper feeder or PD-800 duplex unit. [. . . ]